The Canon IJ printer driver (also known as a printer driver below) is software that is installed on your computer to allow you to print data with this machine. The printer driver converts the print data generated by your application software into data that your printer understands and sends it to the printer.
Before You Setup a Canon Printer, There Are Some Prerequisites You Must Meet.
Before beginning the setup process, always have the model number of your printer handy.
Check to see if your device has enough storage space to install the driver.
Check that the printer is properly plugged into the power outlet.
Full procedure to set up ij cannon
Step 1:
Set up the printer
Remove the printer's connector from the socket
Remove your ij.start.cannon printer from its packaging, as well as any tape or transport material. Also, make sure that any protective material on the inside of the printer has been removed. Check the manual to ensure you haven't forgotten anything.
To power the printer, insert the connector into the socket.
Insert paper into the paper tray.
Switch on the printer.
Step 2:
Insert the Canon cartridges and select the language
Insert the cartridges and load paper into the input tray. The printer is now operational.
Now follow the on - screen instructions
One of the first steps is to select your language
Step 3:
Establish grids and align the scanner
Set up the scanner.
To determine the grids, the printer first prints a print. This means that the printer decides where to print on the paper. Check to see if you're happy with the print. If not, why not? Reset the grids by going to the settings.
Align the scanner by placing the PCB on it.
Start the scan job.
Step 4:
At the bottom of this column, click on the Canon support link.
Enter the name of your printer in the search bar, or choose the appropriate printer family from the list under select product,' such as PIXMA, i-SENSYS, or MAXIFY. On the following page, you can select the appropriate line and model. Your printer's model and serial number can be found on the front of the device, on the box, and in the manual. 3.Under Drivers, choose the operating system on which you want to install the printer, such as Windows.
Step 5:
Launch the software.
Open source software
Open the file and follow the instructions. Choose whether you want to connect the printer via WiFi or via a printer cable in the second step. Connect to WiFi in Step 6
Connect to the WiFi network.
Step 6:
Establish a WiFi connection
Follow the steps in the Canon software to connect to WiFi, or use the printer to connect. The simplest option is to connect to the printer.
Navigate to Settings, then Device Settings, and finally Wireless LAN Settings on your printer.
canon printer setup without a cable or Default settings are the options.
Choose a name for your network. This is known as the SSID.
Enter your WiFi network's password.
Click OK.
Conclusion :
By following these steps you can easily setup your canon printer .
Post a Comment